Lemon Drizzle St Pickett (BIGGLE)
Lemon Drizzle, our first official Biggle to add to our every growing garden of dolls!
A not-so-tiny 3D printed Ball jointed Doll kit from July 2023 for our reopening event. They are a limited edition of just 11pieces.
Biggles are much bigger than blooms, leaflings and seedlings, measuring 16cm tall (approximately!)
Lemon Drizzle is meant to be the child of our previous bloom Confetti Cosmos. They may come back as a leafling later in the event (depending on demand) but in biggle size this is a limited run with no production wait at all! We ask for a few days to prepare them for shipping though!
They come with everything you need to assemble them. Lemon Drizzle features a fully articulated magnetic tail, confetti style paws and a kit for a beaded tail end.
If you’re daunted by the beaded tail end, there will be a tutorial on the blog shortly but if its still not for you, the tail attachment allows you to utilise a whole host of charms. We’ll also be added a tail charm section to the shop in the days and weeks to come so you can swap to something else. The tail does NOT need a tail end to be strung but the beauty of this tail type is that you can customise it to suit your own tastes and needs!
As these are a kit for you to finish at home and will need light standing and stringing work. There will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your doll safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately (They are wearing 10mm here) as well as wig kits for you to make wigs for your doll. Tutorial to come soon.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
Lemon Drizzle, our first official Biggle to add to our every growing garden of dolls!
A not-so-tiny 3D printed Ball jointed Doll kit from July 2023 for our reopening event. They are a limited edition of just 11pieces.
Biggles are much bigger than blooms, leaflings and seedlings, measuring 16cm tall (approximately!)
Lemon Drizzle is meant to be the child of our previous bloom Confetti Cosmos. They may come back as a leafling later in the event (depending on demand) but in biggle size this is a limited run with no production wait at all! We ask for a few days to prepare them for shipping though!
They come with everything you need to assemble them. Lemon Drizzle features a fully articulated magnetic tail, confetti style paws and a kit for a beaded tail end.
If you’re daunted by the beaded tail end, there will be a tutorial on the blog shortly but if its still not for you, the tail attachment allows you to utilise a whole host of charms. We’ll also be added a tail charm section to the shop in the days and weeks to come so you can swap to something else. The tail does NOT need a tail end to be strung but the beauty of this tail type is that you can customise it to suit your own tastes and needs!
As these are a kit for you to finish at home and will need light standing and stringing work. There will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your doll safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately (They are wearing 10mm here) as well as wig kits for you to make wigs for your doll. Tutorial to come soon.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
Lemon Drizzle, our first official Biggle to add to our every growing garden of dolls!
A not-so-tiny 3D printed Ball jointed Doll kit from July 2023 for our reopening event. They are a limited edition of just 11pieces.
Biggles are much bigger than blooms, leaflings and seedlings, measuring 16cm tall (approximately!)
Lemon Drizzle is meant to be the child of our previous bloom Confetti Cosmos. They may come back as a leafling later in the event (depending on demand) but in biggle size this is a limited run with no production wait at all! We ask for a few days to prepare them for shipping though!
They come with everything you need to assemble them. Lemon Drizzle features a fully articulated magnetic tail, confetti style paws and a kit for a beaded tail end.
If you’re daunted by the beaded tail end, there will be a tutorial on the blog shortly but if its still not for you, the tail attachment allows you to utilise a whole host of charms. We’ll also be added a tail charm section to the shop in the days and weeks to come so you can swap to something else. The tail does NOT need a tail end to be strung but the beauty of this tail type is that you can customise it to suit your own tastes and needs!
As these are a kit for you to finish at home and will need light standing and stringing work. There will be flaws and marks that can be easily sanded away. This is a normal part of the production process and nothing to worry about. You must spray your doll ENTIRELY with uv cut sealant to protect them from the sun. Since they are made of a photopolymer resin, this step is vital to keep your doll safe and strong for years to come. INVEST IN A DECENT MASK and always wear when working with resin or sealant.
This is a fun little project that can take anywhere from 1-3 hours depending on your skill level. They will be sent unstrung so that you can work on the parts easily and all magnets and elastic will be provided as a part of the kit.
Eyes are available separately (They are wearing 10mm here) as well as wig kits for you to make wigs for your doll. Tutorial to come soon.
Please refer to the video at the bottom of the page for a thorough tutorial for you follow!
These kits are designed for people of all skill level so don’t be intimidated if you’re new! We all start somewhere.
PLEASE WEAR A MASK.
Invest in a good one. Your health is so important.
Supply List;
Scissors
1.5mm crochet hook is incredibly useful but not necessary.
Lower grit sandpaper (600+ if sanding by hand) or a dremel with abrasive ‘fuzzy’ attachment.
High Grit sandpaper (1500+) for finishing
UV Cut spray.
Includes;
Lemon Drizzle Head
Biggle Body
Confetti Style paws
Long Magnetic Ears
2 Pairs of hands
Fully Articulated magnetic tail
Beaded tail kit
This kit will be sent with all elastic and magnets required to put them together. We use a tension bar system in the neck so no S-hook is included.
Do not forget to spray the entire doll with UV cut spray after sealing! This will protect her resin!
Sini
The video below will be updated to Soleil’s specific video once it has finished being created. Please wait patiently!
